FIG. 1. (Enlarge): Eave installation showing 1/4" wooden cant strip and starter slate.		FIG. 2. (Enlarge): Verge set-up formed using slate-and-a-halfs in alternate courses.

FIG. 3. (Enlarge): Saddle hip installation pointed with elastic cement.	FIG. 4. (Enlarge): Boston hip showing different cuts required.	FIG. 5. (Enlarge): Mitred hip installation using slate-and-a-halfs with metal flashings.

FIG. 6. (Enlarge): Saddle ridge installation.	FIG. 7. (Enlarge): Strip saddle ridge application with slates jointed by elastic cement.	FIG. 8. (Enlarge): Metal roll ridge using non-corroding metal with clips.

FIG. 9. (Enlarge): Ridge tile installation using tiles bedded and jointed in mortar.	FIG. 10. (Enlarge): Open valley installation with non-corroding flashing.	FIG. 11. (Enlarge): Closed valley with metal soakers between each course of slate.