Preparing for the installation of a SlateTec by North Country lightweight roof system requires following local building code standards. Once the approved roof deck and underlayment is installed, you can start to install 1/4" cant strip followed by eave drip edge. Next install any valley metal and rake edge metal and attach ridge nailer for final course of slate.
- Approved Roof Deck as required by local building codes.
- Approved Underlayment as required by local building codes.
- Install 1/4" cant strip.
- Install eave drip edge.
- Install valley metal.
- Install rake edge metal.
- Optional: Install ice dam protection membrane.
- Attach ridge nailer.